How I Built a Paver Pad for Trash Cans (and Questioned Every Life Decision Along the Way)
Tired of muddy trash cans? See how I built a DIY paver pad, what I learned as a beginner, and what I’d do differently next time.
HOME DIY & DECOR
11/6/20266 min read
If you have multiple kids, you know the trash math. We have two garbage cans and one recycling bin, and the only practical place to keep them is along the side of our house.
For years, that spot bugged me. The cans were an eyesore, and they had completely ruined the grass underneath them. What used to be a strip of lawn had become a muddy mess that never seemed to dry out.
Every time I walked past it, I thought, I should really fix that.
This fall, I finally did. I built a paver pad for our trash cans—even though I had never laid pavers in my life.
I figured, How hard could it be?
Spoiler: harder than I expected.
I’m glad I did it, but somewhere in the middle, I absolutely regretted not hiring someone. Here’s what I used, how the project went, and what I’d tell another beginner before they picked up a shovel.
Materials and Tools I Used for Paver Pad
Materials
Pavers
Crushed-rock paver base
Paver bedding sand
Landscape fabric, also called weed cloth
Landscape edging
Sand for filling the paver joints
Paver sealer, optional
Tools
Shovel
Edger
Tape measure
Tamper Welded Steel Head And Handle
These are the supplies I used, not a complete installation checklist. Check the instructions for your pavers and base materials before shopping, including any tools needed for compaction and leveling.
Step 1: Measure the Space for the Trash Cans
Before I touched a shovel, I measured how much room our two garbage cans and recycling bin needed. Then I added a little extra space so I wouldn’t be wrestling them on and off the edge every trash day.
My biggest planning tip: check your paver dimensions before settling on the pad’s final size.
Adjusting the layout slightly may let you fit full pavers instead of reaching the last row and realizing you need to cut every single one.
That is not a discovery you want to make halfway through.
Step 2: Dig Out the Area
I wanted the finished pavers to sit as close to flush with the surrounding ground as possible. That meant digging out enough space for the base, bedding sand, and pavers.
The excavation depth depends on the materials and installation requirements, so work backward from your intended finished height before digging.
I did the digging with a good old-fashioned shovel. It was real, sweaty, “why do my arms hurt?” work.
I also used an edger to cut cleaner lines around the border. If you’re aiming for a rectangle instead of a wobbly blob, that part helps.
Step 3: Plan for Drainage Away From the House
I planned a slight slope away from the house so rainwater would have somewhere to go instead of collecting beside the foundation.
This isn’t something to leave until the pavers are down. The drainage slope needs to be considered while preparing the base—not just when arranging the surface.
The goal was a pad that looked tidy and worked well, not a perfectly flat spot that held water.
Step 4: Lay the Landscape Fabric
Once the area was dug out, I laid landscape fabric across the bottom.
That was part of my setup, but I wouldn’t count on fabric alone to keep the finished pad weed-free. You can also spray weed killer before putting down the fabric.
Step 5: Add the Paver Base and Bedding Sand
Next came the crushed-rock paver base, followed by a layer of bedding sand.
This is the less exciting part of the project, but it deserves your attention. The aggregate base needs to be properly compacted, and the bedding sand needs to be smoothed to a consistent surface while maintaining the drainage slope. Follow the installation requirements for your materials.
If I were approaching this project again, I’d give this stage more of my planning energy. It’s easy to focus on the pavers because they’re the part you’ll actually see.
Everything underneath them matters, too.
Step 6: Lay the Pavers—and Question Everything
This was the step that made me question my entire life.
Getting the rows straight and the paver surfaces even was so much harder than it looked. I wanted everything lined up neatly, and the pavers did not seem particularly invested in helping me.
Eventually, I got them pretty good. Your Tamper Welded Steel Head And Handle tool will help here to get the surface compacted and level but do expect a lot of trial and error before you get it right.
If you’re a beginner like me, give yourself some grace about small cosmetic imperfections. Your trash cans do not care about a one-millimeter gap.
That said, “pretty good” shouldn’t mean ignoring a loose paver or an edge that catches your foot. There’s a difference between a slightly imperfect appearance and something that needs another adjustment.
Step 7: Add the Edging
Once the pavers were in place, I added landscape edging around the border to help hold everything together.
If you’re choosing materials for your own project, check that the edging is suitable for restraining pavers.
Step 8: Seal the Pavers—an Optional Step in My Project
My dad had extra concrete sealer on hand, so I used it.
Honestly, if he hadn’t already had it, I probably would have skipped this step.
Sealing can help protect pavers against stains, fading, and weather damage, but it isn’t a guarantee.
I let the sealer dry for a few days before moving on.
One important note: I’m sharing the order I followed, not a universal sealing schedule. The right sequence and waiting time depend on your sealer and jointing material.
Step 9: Fill the Joints With Sand
After the sealer dried, I swept sand into the gaps between the pavers.
If you’re using polymeric sand rather than ordinary jointing sand, follow its specific installation instructions. It isn’t simply a matter of sweeping it in and walking away. I chose against polymeric sand as I heard it can increase the likelihood of cracks and also doesn't drain water as well as paver sand. I will come back and update if I regret my decision.
The Finished Paver Pad
No more muddy patch. No more ruined grass underneath the cans. Just a cleaner, tidier spot that makes the side of our house look so much better.
Is it perfect? No.
Are a few pavers a little uneven? Yes.
Am I glad I finally tackled it? Absolutely.
This was never about creating a showpiece patio. It was about fixing an everyday annoyance that I had walked past for years.
And on that front, it was a win.
What I’d Tell You Before You Start
Give yourself more time than you think you’ll need. This was not the quick little project I imagined.
Don’t underestimate the digging. Pace yourself, take breaks, and recruit a helper if you can.
Spend time planning the layout and base. The finished surface is only part of the project.
Aim for functional, not flawless. Small cosmetic imperfections are different from loose pavers or troublesome edges.
Hiring someone is a valid option. I’m glad I did it myself, but there were definitely moments when I wanted to hand someone else the shovel.
If you’ve been staring at your own muddy trash can spot, this is your reminder that it doesn’t have to stay that way.
A beginner, a shovel, and a stubborn streak can make a real difference.
Just don’t ask me how enthusiastic I was halfway through.












STAY CONNECTED
GET IN TOUCH
Questions or ideas?
AngelaMarie@mommakeshome.com
© 2026. All rights reserved
